Oil-Injected Rotary Screw Air Compressor HGS 15-37

 

High efficiency airends manufactured by one of the leading airend manufacturers. Our airend design is based on new rotor profile and lobe combination, which is the result of long experience of screw compressor performance, new CAD Methods and utilization of modern production technology. The new rotor profile with minimized “blow hole” reduces torque requirement, which means lower power consumption.

 

 

Replaceable glassfibre panel type pre-fibre and dry type paper filter element, eleminate dusty ambient problems.

 

 

Effective design provides three stage separation.

Long life separator elements reduce oil in compressed air less than 3 ppm.

Spin-on elements provides fast and easy separator element replacement (HSC 15-37).

 

 

4 ways thermostatic valve on a multi-block, provide trouble free operation in low ambient temperatures.

 

 

High performance and efficient cooling system to ensure the compressor to run at optimum temperature continuously.

Long life free operation with “bar/plate” type aluminium combi-cooler. Coolers are selected to provide trouble free operations even in high ambient temperatures.

Silent and efficient axial fans with new blade profiles.

Water-cooling option with “bar/plate” type copper heat-exchangers.

New fan-housing designs to service and clean coolers easily.

 

 

Belts are selected according to 25.000 operating hours. Pulleys with taper bush can be easily disassembled and assembled. Easy belt tensioning system provide trouble free operation.

 

 

Electronic LCD panel indicates any type of operational and service activities in the easiest way to make everybody understand perfectly. Different type safety systems provides protection for any type of risk.

All electrical components in the cubicle are choosen from well known brands all over the world.

    

 

Special rubber vibration pads eliminates vibration and problems it may cause.

 

 

• Compact machine design provides minimum working space. 

• Demontable canopy doors provide easy maintenance and enables easy intervention for every point of the machine.

• Soundproof steel canopy is covered with flame proof special material provide low noise levels.

 

 

• Screw compressor

• 380 V/3 ph/50 Hz, IP 54 TEFV mot or

• Direct drive system with belt pulley

• Demontable accoustic canopy

• Rigid steel base

• Three micron dry type air inlet filter

• Air/oil seperator element with 3ppm efficiency and tank

• Ten micron full flow oil filter

• Minimum pressure valve

• Thermostatic valve

• Pressure relief valve

• Blowdown valve with silencer

• Star-delta cubicle

• Hertz H8 electronic control panel on

 

 

• High efficiency combi “bar/plate” type air/oil aftercooler

• Cooling fan on seperate motor

• Factory filled oil up to 4000 hours

 

 

• Motor overload shutdown

• Fan motor overload shutdown

• Phase sequence shutdown

• High airend discharge temperature shutdown

• High discharge pressure shutdown

• Change separator element indicator

• Air filter change warning

• Pressure relief valve

• Emergency stop button