| Measuring Range |
From 1" to 48" (25.4mm to 122cm) bolts |
| Time |
Nanoseconds |
| Elongation |
Change in length (inches/millimeters) |
| Load |
Force load applied (pounds kIP or kN Killonewtons) |
| Stress |
Force for unit area stress applied (pounds kPSI or megapascals MPa) |
| Strain % |
percentage strain applied (inches per inch or millimeters per millimeter) |
| Resolution |
+/- .00001 inches (0.0001 mm) |
| Velocity Range |
.0492 to .3936 in/ms
1250 to 9999 meters/sec |
| Calibration |
Fixed, Single, and Two point zero calibration options.
Select bolt material types from a preset or custom list.
|
| Units |
English & Metric / Fahrenheit & Centigrade |
| Measuring Modes |
Pulse-Echo (standard)
Pulse-Echo w/Gate (fine adjust) |
| Pulser |
Square wave pulser with adjustable pulse width (spike, thin, wide) |
| Receiver |
Manual or Auto Set gain control with 40dB range |
| Timing |
10 bit 250 MHz digitizer |
| Display Modes |
A-Scan - Rectified +/- (half wave view), or RF (full waveform view) |