Thiết bị đo nồng độ hơi dầu S 120 (residual oil sensor)
Hãng: CS-iTec (Đức)
| Technical data S 120 |
| Measuring range |
0.003 … 10.00 mg/m³ |
| Sensor type |
PID (photoionization detector) |
| Detection limit |
0.003 mg/m³ |
| Accuracy |
5% of reading +- 0.003 mg/m³ |
| Operating pressure |
3 … 15 barg (higher pressure on request) |
| Gas humidity |
< 40% rel. humidity, no condensation |
| Sample flow rate |
< 2 l/min, measuring gas is released to ambient |
| Gas connection |
6 mm quick connect |
| Electrical connection |
M12 connector |
| Sensor life time |
6000 operating hours. Will be indicated. Sensor exchange by service |
| Gas temperature |
-20 … 50 ºC (at inlet) |
| Ambient conditions |
-20 … 50 ºC |
| Transport temperature |
-30 … +70 °C |
| Output signal |
4…20 mA (0 … 10 mg/m³)
RS-485, Modbus/RTU
Relay: NO, 32 VDC / 500 mA |
| Power supply |
24 VDC ± 5%, 8 W |
| Display & data logger |
5” touch screen, 100 million values (option) |
| Application |
Downstream of activated carbon filters
Downstream of oil-free compressors
Wherever upstream drying and filtration is applied |
| Casing/dimensions |
PC, Al alloy, 271 X 205 X 91 mm |
| Classification |
IP65 |
| EMC |
According to IEC 61326-1 |
| Settings |
Various sensor settings can be performed
through CS-iTEC display units or through the
related service software |
| Weight |
2400 g |
| Sample rate |
1 s |
