|
|
| Bridge power supply |
DC12 V±0.3 V within 280 mA |
| Applicable transducer |
Up to 8 units of Minebea's digital load cells are connectable. |
| Input interface |
RS-485 (2-wires method) |
| Baud rate |
56 700 bps |
| Termination |
Externally *Terminating resistance must use 120 ohms. |
| Digital display range |
- 99 999 ~ 99 999 (Changeable to x2, x5, x10, x20 or x50) |
| Display unit |
7 segment red LED with 14.2 mm character height. |
| Over display |
'-OL' display at minus(-) over, and 'OL' display at plus(+) over |
| A/D value over display |
'-OVF' display at minus(-) over, and 'OVF' display at plus(+) over. |
| Status display |
STAB, TARE, GROSS, NET, ZERO, HOLD |
| Judgement display |
S1, S2, S3, S4, S5 |
| Display rate |
15 times/s (Changeable to 5 times/s.) |
| Display of decimal point |
Changeable to no display, 101, 102, 103, 104. |
| External control function |
ON/OFF, SET, TARE, NET/GROSS, ZERO, PRINT, NET display, HOLD display. |
| Comparator function |
|
| Display range |
-99 999 ~ 99 999
(0 ~ 99 999 for flow mode and discharge mode.) |
| No.of set points |
5 points of S1, S2, S3, S4 and S5. |
| Set value of hysteresis data width |
0 ~ 99 digit |
| Hysteresis direction |
Changeable to either 'On-delay' or 'Off-delay' |
| Comparator conversion rate |
Changeable to 5 times/s or 15 times/s.
(Synchronized with display rate.) |
| RS-232C interface |
Baud rate : Selectable from 1 200 bps, 2 400 bps, 4 800 bps or 9 600 bps.
Data bit length : Selectable from 7 bit or 8 bit.
Parity bit : Selectable from none, even or odd.
Stop bit : Selectable from 1 bit or 2 bit.
Terminator : Selectable from CR + LF or CR.
Communication method : Half duplex
Synchronous method : Start-stop synchronous method
Transmission data : ASCII code
Cable length : Upto 15 m
Signal name : TXD, RXD, COM.1 |
| Operating temp./humidity range |
Temperature - 10 ℃ ~ 50 ℃
Humidity 85 % or less (Non condensing) |
| Power supply |
AC100 V ~ AC240 V (AC85 V ~ AC264 V) 50/60 Hz |
| Power consumption |
Approx. 13 VA (without any options at AC100 V )
Approx. 15 VA (with options at AC100 V) |
| Weight |
Approx. 0.3 kg (without options) |
| Dimension (W x H x D) |
96 mm x 48 mm x 120 mm |
| Protection code |
IP65 (Only for the fron panel when the attached panel mounting gascket is installed. |