|
|
|
|
Mã SP:
- Model:
RKC
Máy đo momen I-8/I-80 Imada
- Zalo/SĐT: 0948.007.822;Mail: yen@ttech.vn
Máy đo lực kéo nén Imada DST-50N, DST-20N, DST-5N, DST-2N; Máy đo lực kéo nén Imada DST-500N;Máy đo lực kéo nén Imada DST-200N;Máy đo lực kéo nén Imada DST-1000N;Máy đo lực kéo nén Imada DSV-1000N;Máy đo lực kéo nén Imada DSV-500N,DSV-200N;Máy đo lực kéo nén Imada DSV-5N,DSV-2N;Máy đo lực kéo nén Imada ZTA-2N;ZTA-5N;ZTA-20N;ZTA-50N;Máy đo lực kéo nén Imada ZTA-2500N, ZTA-5000N;Máy đo lực kéo nén Imada ZTA-100N, ZTA-200N, ZTA-500N, ZTA-1000N;Máy đo lực kéo nén Imada ZAT-DPU;ZTS-DPU;Máy đo lực kéo nén Imada ZTS-2N, ZTS-5N, ZTS-20N, ZTS-50N;Máy đo lực kéo nén Imada ZTS-100N, ZTS-200N, ZTS-500N, ZTS-1000N;Máy đo lực kéo nén Imada ZTS-2500N, ZTS-5000N;Máy đo lực kéo nén Imada ZTS-200N, ZTS-500N, ZTS-1000N;Máy đo lực kéo nén Imada ZTS-2N, ZTS-5N, ZTS-20N, ZTS-50N, ZTS-100N;Máy đo lực kéo nén Imada ZTA-2500N, ZTS-2500N, ZTA-5000N, ZTS-5000N;Máy đo lực kéo nén Imada ZTA-200N, ZTA-500N, ZTA-1000N;Máy đo lực kéo nén Imada ZTA-2N, ZTA-5N, ZTA-20N, ZTA-50N, ZTA-100N;Máy đo lực kéo nén Imada ZTA-2500N, ZTS-2500N, ZTA-5000N, ZTS-5000N;Máy đo lực kéo nén Imada DSV-2N, DSV-5N, DSV-20N, DSV-50N;Máy đo lực kéo nén Imada DSV-200N, DSV-500N;Máy đo lực kéo nén Imada DSV-1000N;Máy đo lực kéo nén Imada DST-500N, DST-1000N;Máy đo lực kéo nén Imada DST-2N, DST-5N, DST-20N;Máy đo lực kéo nén Imada DST-50N, DST-200N;Máy đo lực kéo nén hãng Imada
|
THÔNG TIN SẢN PHẨM
| Model |
I – 8 |
I – 80 |
| Measuring range*1 |
0.20~78.60 cN-m |
0.020~7.860 N-m |
| 0.020~8.000 kgf-cm |
0.20~80.00 kgf-cm |
| 0.020~6.970 lbf-in |
0.20~69.70 lbf-in |
| - |
2.0~786.0 cN-m |
| Accuracy |
+/- 0.5% (reading value) or +/-3digit in less than 499 digit. |
| Display |
4 digits LCD display |
| Measuring direction |
CW-CCW (Right turn /Left turn) |
| Measuring mode |
P-P(Peak-hold), T-R(Track), P-D(Peak-down),C(real time data output) |
| Upper/Lower value setting |
Upper/ Lower value are able to be set in the measuring range. |
| Pass-fail decision |
Pass/Fail can be check in the measuring range.(P-P mode) |
| GOOD (Pass)…Green lights, NG( Fail)…Red blinks |
| Max./ Min./Ave. display |
Display stored Max. / Min. /Ave. / Number of measuring values. |
| Real time data output |
Output applied torque approx. 1/180 sec each. |
| Internal memory |
800 data |
| Output data |
ASCII (baud rate 19200 bps) |
| Auto zero reset function |
Automatic clear value function in each 0.1~3.0 sec (The setting is possible from 0.5 sec each). Manual zero reset setting is at 0.0 sec. |
| Zero Reset function |
Auto or Manual (only pressing the button.) |
| Battery |
Ni-Cd 1.2v×5 cell(700mAh) 300 times |
| Auto power-off |
Auto power-off in 10 minutes with no operation. |
| Charging time/ Usable time |
Approx.3 hours/ Approx. 12 hours continuous use after full charge. |
| Socket joint part (Detecting parts shape) |
Square 20 mm / Square 9.5 mm |
| Included items (1 each) |
Driver adapter OW-025/OW-10 |
Driver adapter OW-20/OW-60 |
| Attaché case, battery charger, inspection certificate (*2), calibration certification (*2), traceability system diagram(*2). |
*This product is NOT suitable for impact tools.
*1 It is only approved for the international model. The Japanese model is different range.
*2 All documents are written in English.
|