| Item |
Specifications |
| Load Sensor |
Principle |
Electro - balance sensor |
| Measurement range |
10.00gf～－5.00gf |
| Measurement accuracy * |
± (10mgf + 1 digit) |
| Resolution |
Less than 900 mgf: 0.001 gf More than 900 mgf: 0.005 gf |
| Temp. Sensor |
Measurement range |
0～300℃ |
| Measurement accuracy |
±3℃ |
| Heater unit |
Temp. of heater unit |
Room temperature ～ 300℃ |
| O2 Concentration |
Simple closed heater unit with nipple for N2 purge test |
| Temp. profile setting |
1. Preheat temp.
2. Preheat time
3. The rate of temp. rise 3℃ /sec. (standard)
4. Maximum temp.
5. Maximum temp. time |
| Melting point |
Preset solder paste melting point |
| Table movement |
Automatic: operated by PC
Manual: operated by Up/Down switch (selectable 3 steps speed) |
| Digital output |
RS-232C cable (Malcom format) |
| Air supply |
Original air pressure: 0.2～0.5 Mpa (Approx. 2～5 kgf / cm2)
Adjustment air: 0.2 Mpa (Approx. 2kgf / cm2 )
|
| Power supply |
AC100V 50 / 60Hz 700W |
| Weight |
Approx. 20kg |