Product Highlights
Flash rates from 30 to 50,000 flashes per minute, adjustable in 1 FPM increments. The all digital, crystal controlled microprocessor keeps readings rock steady.
Individual in and output TTL jacks for provides signal to remote data collector from accelerometer.
Average Power - Watts 11Watts @ 3000 FPM; >13Watts @ 3450 FPM
Tachometer Mode 5-250,000 RPM from external trigger
Relative Phase Adjustment is user selectable allows reference mark to positioned at a convenient visual location.
Backlit alphanumeric LCD display shows flash rate in flashes per minute.
Flash Range 30-50,000 FPM (Flashes/Minute) 0.5-830 FPS (Flashes/Sec. or Hz)
Selectable tracking filter allows for solid phase reading.
Flash Rate Resolution (Internal Triggering) 0.01 to 1.0 FPM (Menu Selectable)
Indicators Battery Level, On Target, Time, Auto, Alt, Tach, Lock, and EXT icons
Operating Time 2 hours typical @1800 FPM (operates continuously on AC power)
Phase Delay - Degrees 0.1 to 359.9 degrees
Tracking Filter Selectable Wide and Narrow Bandwidths. Filtoer may not lock below 100 FPM
Time Delay 0.01 to 1000 msec.
Accuracy ±0.002% of Setting ± least significant digit
Digital Adjustment Knob 36 detents per revolution and blinking decade selection
Virtual RPM (Slow Motion) 0-200 VRPM
Flash Energy (Typical) 230 mJoule up to 3450 FPM
Flash Duration (Typical) 8-20 microseconds
External Input (1/8" phone plug) Input Pulse - 0.5 usec min, TTL to 24V max (1/8" phone plug)
Trigger Output/Remote Sync (Typical) 3.3V TTL Compatible 40 usec pulse-Positive/Negative