|
|
-
Mã sản phẩm:
TERMOTECH-ITALY
Spring-loaded resistance thermometer indicated
for measurement into metallic plates; the fixing is
by threaded connection with bayonet fitting; due to
the bended cable output this probe is particulary
indicated where are present problems of space.
The immersion depth is adjustable; the stem and
the load spring are made in stainless steel.
-
Mã sản phẩm:
TERMOTECH-ITALY
Resistance thermometer for immersion with AISI
316 sheath suitable for temperature measurement
in chemical and/or food industry.
The process connection is realized by means of a
sanitary clamp; the immersed part of the stem have
a mirror finishing surface to avoid the possibility of
rust corrosion.
The electrical connection is made by a ceramic terminal block situated inside the connection head.
Available also with analogic 4-20 mA output
-
-
Mã sản phẩm:
TERMOTECH-ITALY
Technical Features
- Operating temperature: Depending on the cable type
- Accuracy(1): According to EN60751 class A, B or AA
-
Mã sản phẩm:
TERMOTECH
Resistance thermometer for immersion suitable for
measurements in narrow space on plant with low
pressures.
The process connection is realized by means of
threaded nipple welded directly on the sheath.
The electrical connection is made by a connector
with angled cable exit acc. to EN 175301-803
standard.
-
Mã sản phẩm:
TERMOTECH-ITALY
Technical Features
- Operating temperature: Depending on the cable type
- Accuracy(1): According to EN60751 class A, B or AA
-
Mã sản phẩm:
TERMOTECH
Resistance thermometer for immersion with
exchangeble thermometric insert (type RIS) and
orientable connection head suitable for measure
ments and regulations on plant with low pressures.
The process connection is realized by means of a
316SS flange and the electrical connection is made
by a ceramic terminal block situated inside the con
nection head.
Available also with analogic 4-20 mA output.
-
Mã sản phẩm:
TERMOTECH
Resistance thermometer with mineral oxide insula
tion for immersion with connection head, suitable
for generical measurements and regulations on
plants with low pressures and with high vibrations.
The process connection is realized by means of an
under-head threaded nipple (fix) or by means of
compression fittings or slidable flanges (see acces
sories).
The electrical connection is made by a ceramic ter
minal block situated inside the connection head.
Available with analogic 4-20 mA output.
-
Mã sản phẩm:
TERMOTECH
Thermometric insert with MgO insulation suitable
for use into assembly type RRG etc.
Due to the load springs, this probe is always man
teined pressed on the bottom of the thermowell.
The MgO insulation give at this type of sensor a
very good vibration proof and insulation resistance.
Avalible also with analogic 4-20 mA output.
-
Mã sản phẩm:
TERMOTECH-ITALY
Technical Features
- Operating temperature: -50+250°C
- Accuracy(1): According to EN60751 class A,B or AA
- Protection degree: IP65
-
Mã sản phẩm:
TERMOTECH-ITALY
ring-loaded resistance thermometer indicated
for measurements into metallic plates; the fixing is
by threaded connection with bayonet fitting.
The immersion depth is adjustable up to 190mm
(on request is also available the model up to
300mm); the stem and the load spring are made in
stainless steel.
-
Mã sản phẩm:
TERMOTECH-ITALY
Technical Features
- Operating temperature: -50+350°C
- Accuracy(1): According on EN60751 class A, B or AA
- Protection degree: IP65
-
Mã sản phẩm:
TERMOTECH-ITALY
Technical Features
- Operating temperature: -80+250°C
- Handle operating temperature: -40+105°C
- Accuracy(1): According to EN60751 class A, B or AA
- Protection degree: IP65
- Stem material: AISI 316
-
Mã sản phẩm:
TERMOTECH
Resistance thermometer for immersion with
exchangeble thermometric insert (type RIS) and
orientable connection head suitable for measurements and regulations on plants with low
pressures.
The process connection is realized by means of a
threaded nipple and the electrical connection is
made by a ceramic terminal block situated inside
the connection head.
Available also with analogic 4-20 mA output.
-
Mã sản phẩm:
TERMOTECH
Thermometric insert with standard insulation suitable for use into assembly type RTG etc.
Available with 6 mm or 8 mm external diameter.
Due to the load springs this probe is always manteined pressed on the bottom of the thermowell.
The sheath is filled with pressed and dry allumium
powder that give at this type of sensor a very high
vibration proof and insulation resistance also at
high temperature.
Avalible also with analogic 4-20 mA output.
-
Mã sản phẩm:
TERMOTECH-ITALY
Resistance thermometer with stainless steel sheath
suitable for generical measurements and regula
tions.
The probe fixing is realized by means of a brass
ring soldered on the tip of the tube; it can be fixed
on a surface with a normal screw.
The output cable is protected with a stainless steel
spring.
-
Mã sản phẩm:
TERMOTECH
Immersion resistance thermometer with MgO
insulated exchangeable thermometric insert (type
RIM), orientable connection head and tapered protective sheath for fast response time, suitable for
measurements and regulations on plants with low
pressures.
The process connection is realized by means of a
316SS flange and the electrical connection is made
by a ceramic terminal block situated inside the connection head.
Available also with analogic 4-20 mA outp
-
Mã sản phẩm:
TERMOTECH-ITALY
Technical Features
- Operating temperature (sensing part): -80+600°C
- Operating temperature (transition sleeve): max
200°C
- Accuracy(1): According to EN60751 class A, B or A
-
Mã sản phẩm:
TERMOTECH
Immersion resistance thermometer with exchan
geable MgO insulated thermometric insert (type
RIM), orientable connection head and tapered pro
tective sheath for fast response time, suitable for
measurement and regulations on plants with low
pressures.
The process connection is realized by means of a
threaded nipple and the electrical connection is
made by a ceramic terminal block situated inside
the connection head.
Available also with analogic 4-20 mA output.
|