Small, light, versatile probe
13 mm (0.51 in) diameter standard kinematic touch-trigger probe with an M8 thread mount
Adjustable trigger force to support a wide range of styli
Compatible with M2 styli
Compatible with the full range of Renishaw probe heads and accessories
Suitable for manual and DCC CMMs
|
Principal application
|
Universal DCC and manual CMMs
|
|
Sense directions
|
5-axis: ±X, ±Y, +Z
|
|
Unidirectional repeatability maximum (2σ μm) (at stylus tip)
|
0.35 μm (0.000014 in)
|
|
Pre-travel variation 360° (XY plane)
|
±0.80 μm (0.000032 in)
|
|
Weight *excluding shank and cable
|
22 g (0.78 oz)
|
|
Stylus range
|
M2
|
|
Stylus force range (adjustable)
|
0.07 N - 0.15 N
|
|
Stylus force (set by Renishaw)
|
0.07 N - 0.08 N
|
|
Stylus overtravel (typical)
XY plane +Z axis
|
±14°
4 mm (0.16 in) @ 0.07 N
3 mm (0.12 in) @ 0.15 N
|
|
Maximum extension on PH10 series
|
300 mm (11.81 in)
|
|
Mounting method
|
M8 thread
|
|
Suitable interface
|
PI 7-3, PI 200-3, UCC
|
Above data applies to test conditions as follows:
- Stylus length 10 mm (0.39 in)
- Stylus velocity 480 mm/min (1.57 ft/min)
- Stylus force 0.07 N - 0.08 N