METER DISPLAY
3-1/2 digit Liquid Crystal Display with 0.4" digit height. Automatic polarity, HOLD and LOW BATTERY indicators.
OUTPUT
Analog signal output and 30 inch two conductor cable provided. ± 10.0KV meter reading equals ± 1.0 volts output.
RANGE
High Range 0 V to ± 19.99 KV; least significant digit indicates tens of volts at one inch distance.
Low Range 0 V to ± 1,999 V; least significant digit indicates 1 volt at one inch distance.
Measures higher voltages at greater distances, e.g., at two inches double indicated voltage, at four inches multiply indicated voltage by four.
RANGE LIGHTS
Red "Bulls Eye" at one inch distance
ACCURACY & ENVIRONMENT
± 2% at ambient conditions ( 23ºC and 30% Rh).
± 5% at 0 - 50ºC and 0 - 85% Rh (non-condensing).
Accuracy unaffected by the presence of air ionization.
RESPONSE
Digital display updates three (3) times per second.
Analog Output Time Constant: Either Range 0.1 sec.
Display Time Constants: High Range 0.2 sec; Low Range 2.0 sec
CONTROLS
Three position slide switch: KV/INCH - OFF - V/INCH
Sample/HOLD push button, and ZERO adjust knob.
GROUNDING
Meter circuit grounded through the conductive case and 10 mm snap fastener mounted on back of case.
POWER
9 VDC alkaline battery. Battery life minimum 40 hours.
DIMENSIONS
2.4" wide x 4.2" long x .9" deep (1.3" deep with zero knob and snap fastener).
WEIGHT
5 ounces, with battery
PCS-730 CHARGING SOURCE
INPUT POWER
9 Volt Alkaline Battery. Battery life in excess of 40 hours continuous operation.
OUTPUT
± 1,000 volts DC Minimum, Current limited to less than 1 Microamp.
OUTPUT
Female banana jack provided with mating contact rod.
GROUNDING
10mm female snap fastener on rear of case. Note that wand must be installed and unit grounded for proper operation.
SIZE
2.5"W x 4"L (4.2"L with jack) x 1.5"D (1.8"D with switch and snap)
WEIGHT
6 oz (with battery)
CPM-720A CHARGE PLATE ASSEMBLY
ISOLATED PLATE
Stainless Steel parallel plates, 3.25 inches square. Auxiliary female jack installed.
CAPACITANCE
Plate Capacitance 10 picofarads (pF) ± 1 pF
Note: Plate capacitance is 15.8 pF when mounted to PFM-711A Filed Meter
RANGE
0 to ± 6 KV at a plate separation of 0.60 inch.
ACCURACY
± 2% at 1,000 volts. Calibration adjustment screw provided.
GROUNDING
Through conductive case and snap fastener of Model PFM-711A.
SIZE
3.25"W x 3.25"L x .9"D (1.0"D with jack).
WEIGHT
8 oz.