THÔNG TIN SẢN PHẨM
It is significantly up operation and functionality
Operation and functionality by the personal computer use is significantly up.
Measured with high accuracy to thick ones from thin ones
Until thick ones from the film thickness thin thing of it by replacing the radiation source can be measured with a high degree of accuracy.
Small-area portion can also be measured
By the exchange of the mask, also it can be measured small-area portion. The mask is Yes available number.
Special calibration curve easy programming
Multi-point calibration input is possible (2 to 9 points), you can easily program a special calibration curve.
Easy to count correction
Can count correction at any time, it can be measured with high accuracy without a warm-up of GM tube.
Measurement calibration curve memory can be up to 40 this
Measurement calibration curve can be memory up to 40 this. Memory has been calibration curve can be copied to the other channel.
Calibration curve is re-calibration possible at one point correction of material
The calibration curve can be re-calibrated at one point correction of material.
Upper limit, the setting of the lower limit
The upper limit of the effective measurement values, you can set the lower limit.
Film thickness value and the composition ratio can be measured
Alloy coating, you can composition ratio measurement and film thickness value.
Or more can be of measurement in a pipe φ80mm
Measurements in the pipe can be equal to or greater than φ80mm.
Film thickness value by the measurement errors at any time can be deleted
Film thickness value by the measurement errors can be deleted at any time.
Time and units can be arbitrarily set
Measurement time can be set to any from 1 to 999 seconds. The units of measurement, μm, can change MI, mil, composition%, even count% unit time, the measurements are automatically converted.
Beta-ray film thickness meter BTC-221 specifications
| Model (body) |
RTC-221 type |
| principle |
Beta-wire |
| Measurement mode |
1) Thickness measurement
2) beta-ray count measurement |
| Measurement time |
1-999 seconds any setting |
| Memory capacity |
40 channels |
| display |
By the computer monitor screen |
| Statistical processing |
Maximum, minimum, mean, standard deviation, histogram, setting upper and lower limit values |
| Power supply |
AC100 ~ 240V ± 10% 50 / 60Hz, 10VA (body) |
| Size |
280 (W) x230 (D) x88 (H) (body) |
| weight |
3.0kg |